Vyhledávání
-
Loctite 3D IND5714 Grey Resin - 1kg
Loctite 3D IND5714 is a gray elastomer with high rebound properties and excellent repetitive strain resistance. Shore A hardness combined with excellent compression set, good tear resistance and strength makes this material ideal for use in a wide variety of industrial elastomeric, safe touch applications.HighlightsSafe touch and high reboundImproved processing with excellent H&S...
Na objednávku (10001 ks)
6949 Kč
-
E3D RapidChange Revo Nozzle Assembly High Flow Boxed 0.6mm
High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials.Highlights:Maximum temperature: 300°CFilament diameter: 1.75mmVoltage: 24VCompatible with:...
Na objednávku (10001 ks)
1169 Kč
-
BondTech Motor Cable JST-XH4 Sleeved
700 mm, JST-XH4 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for our 40 mm Geared Nema17 motor, please make sure that it follows the schematics for your application.
Na objednávku (10001 ks)
59 Kč
-
BASF Ultrafuse PP GF30
Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range.Highights:Excellent chemical resistanceLow densityLow moisture uptakeHigh heat resistanceImproved UV resistance
Na objednávku (10001 ks)
6559 Kč
-
E3D RapidChange Revo Nozzle Assembly High Flow Boxed 0.4mm
High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials.Highlights:Maximum temperature: 300°CFilament diameter: 1.75mmVoltage: 24VCompatible with:...
Na objednávku (10001 ks)
1169 Kč
-
Bondtech LGX PRO 2.85™ Extruder
The Bondtech LGX® PRO Large Gears eXtruder uses Bondtechs new Dual Drive Technology based on larger drive gears. A stronger and more robust LGX Large Gears eXtruder for industrial application with 2.85mm filaments.HighlightsTougher housing with higher heat toleranceStronger motor for more push forceHarder steel drive trainCleaner and sober design.
Na objednávku (10001 ks)
4879 Kč
-
Slice Engineering RepRap M6 GammaMaster Nozzle
Introducing the GammaMaster® Nozzle – the newest nozzle technology by Slice Engineering, incorporating cutting-edge developments in metallurgy and surface preparation. Gone are the days of compromising thermal performance while printing with abrasive filaments, as GammaMaster offers the ultimate solution. Engineered specifically for abrasive filament printing, this RepRap nozzle boasts...
Na objednávku (10001 ks)
779 Kč
-
Polymaker PolyLite Silk PLA Dual Color
PolyLite PLA is a high-quality PLA designed for reliability and ease of printing. PolyLite PLA is based on a high molecular weight PLA from Natureworks, which makes it one of the most rigid PLA material on the market. HighlightsPolymaker-Quality GuaranteedWide Range of Colours AvailableEasy to Print
Na objednávku (10001 ks)
799 Kč
-
E3D RapidChange Revo Nozzle Assembly High Flow Boxed 0.8mm
High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials.Highlights:Maximum temperature: 300°CFilament diameter: 1.75mmVoltage: 24VCompatible with:...
Na objednávku (10001 ks)
1169 Kč
-
Ortur Aufero Laser 2 Extension Kit
This extension kit can increase the engraving area with 153%, allowing you to create both more and bigger. The kit is compatible with the Ortur Aufero Laser 2.Highlights:Engraving Area at 390 x 600 mmReinforced Aluminium AlloyEasy to Replace
Na objednávku (10001 ks)
3669 Kč
-
E3D RapidChange Revo Nozzle Assembly High Flow Boxed 1.4mm
High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials.Highlights:Maximum temperature: 300°CFilament diameter: 1.75mmVoltage: 24VCompatible with:...
Na objednávku (10001 ks)
1169 Kč
-
Slice Engineering RepRap M6 GammaMaster Nozzle
Introducing the GammaMaster® Nozzle – the newest nozzle technology by Slice Engineering, incorporating cutting-edge developments in metallurgy and surface preparation. Gone are the days of compromising thermal performance while printing with abrasive filaments, as GammaMaster offers the ultimate solution. Engineered specifically for abrasive filament printing, this RepRap nozzle boasts...
Na objednávku (10001 ks)
779 Kč
-
Snapmaker 2.0 Quick Swap Kit - 250
The Snapmaker 2.0 Quick Swap Kit is a new system that allows you to switch between functions quickly. Compatible with Snapmaker 2.0 A250T/A250/F250HighlightsOne minute swapCompatible with all the toolheads that are compatible with Snapmaker 2.0Convenient to switch functions even in the enclosureAll-metal design to ensure reliability
Na objednávku (10001 ks)
4409 Kč
-
xTool P2 Automatic Conveyor Feeder
This conveyor device ensures that longer materials are automatically conveyed through the device. This increases the working area of your xTool P2 laser up to 3000 x 500mm (with add on kits)! Thanks to the pressure rollers with anti-friction coating, the device automatically feeds your material, so you don't have to push it through the machine by hand. Please Note: Must be used with Riser...
Na objednávku (10001 ks)
11239 Kč
-
Vallejo Airbrush Thinner 18ml
Vallejo Airbrush Thinner increases the fluidity and transparency of the colors while maintaining their adhesion properties. Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while...
Na objednávku (10001 ks)
99 Kč