Raise3D Premium ABS
ABS or Acrylonitrile Butadiene Styrene is one of the most widely used industrial thermoplastics, which has great mechanical properties and good heat resistance up to 90°C. Parts printed with ABS are not only widely used in the prototyping stage of product development, but also in later stage of function testing and parts assembling. Printed ABS parts have been successfully used in the manufacturing application with or without post-finishing. To print ABS successfully, heated bed and closed chamber is necessary; to print ABS in office/factory and indoor environments, an air filter is recommended.
Applications
Functional prototyping
Applications
- Tools and fitting
- Prototyping and concept models
Material Performance
Printing Notifications:
- For a better bed adhesion, brim or raft are recommended and set bed temperature at 100 °C and turn off the cooling fan for the first few layers.
- PLA can be used for break-away support material for ABS.
For ideaMaker Users:
Choose the right printing profile for ABS on ideaMaker IO and use it on ideaMaker. Download the latest version of ideaMaker.
Basic Data Printing Parameter
| Filament Typ | ABS |
| Diameter | 1,75 mm |
| Tolerance | 0,05 mm |
| Weight | 1,00 kg |
| Lenght | 378 m |
| Recomended Printing Temp Min | 245 ºC |
| Recomended Printing Temp Max | 265 ºC |
| Recomended Printbed Temperature Min | 90 ºC |
| Recomended Printbed Temperature Max | 100 ºC |
| Recomended Printing Speed Min | 25 mm/s |
| Recommended Printing Speed Max | 90 mm/s |
| General | |
| Specific gravity | 1,1 g/cm3 ASTM D792 |
| Temperature | |
| Vicat softening temp | 105 °C |
| Tensile | |
| Tensile strength | 33,3 MPa ASTM D638 |
| Tensile modulus | 2174 MPa ASTM D638 |
| Elongation | |
| Elongation at break | 2,7 % ASTM D638 |
| Flexural | |
| Flexural Strenght | 59 MPa ASTM D790 |
| Flexural Modulus | 1339 MPa ASTM D790 |
| Other | |
| Impact Strength | 12,6 KJ/m2 ASTM D256 |
Raise3D Premium ABS - 1.75mm - 1 kg
1219 Kč