PrimaSelect PEI Ultem 1010 - 1.75mm - 500g - Natural

Polyether Imide (PEI) Ultem 1010 3D printer filament – Flame-retardant plastic UL94 V0 & 5VA ratings

PrimaSELECT Polyether Imide (PEI) Ultem 1010 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C. The 3D printing material performs in continuous use up to 170 °C. This inherently flame-retardant plastic has UL94 V0 and 5VA ratings.

Material properties PrimaSELECT Ultem 1010:

• Polyether Imide (PEI) 3D printer filament
• Amorphous, amber to transparent thermoplastics
• Glass transition temperature (Tg) of 217 °C
• Performs in continuous use up to 170 °C
• Flame-retardant plastic – UL94 V0 and 5VA ratings
• Perfect for aerospace, automotive and electronics industry

PEI Filament – High manufacturing quality

The PrimaCreator PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the PrimaCreator PEI Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

To make a successful PEI print there are a few things to keep in mind

The printer must have the performance to meet the PEI filament and it should be printed with a nozzle temperature of 350-380°C. The heat bed should be set to 120-160°C and a heated chamber is important to have. It´s also very important to make sure that the printer is placed in a room where there´s hardly any draft and temperature fluctuations.PEEK is best printed on a PEI sheet at a printing speed of 15-30 mm/s.

For further information, check the TDS.

Filament Typ	PEI Ultem 1010
Diameter	1,75 mm
Weight	0,50 kg
Lenght	164 m
Color	Natural
Recomended Printing Temp Min	355 ºC
Recomended Printing Temp Max	390 ºC
Recomended Printbed Temperature Min	120 ºC
Recomended Printbed Temperature Max	160 ºC
Recomended Printing Speed Min	20 mm/s
Recommended Printing Speed Max	35 mm/s
General
Specific gravity	1,27 g/cm3   ISO 1183
Mold Shrinkage	0,5 - 0,7%
Specific volume resistivity	1.0E+15 Ω*cm    IEC 60093
Temperature
Vicat softening temp	215 °C   ISO 306/A50
Heat deflection temp	200 °C   ISO 75-2/Be
Tensile
Tensile strength	105 MPa   ISO 527-2/50
Tensile modulus	3200 MPa   ISO 572-2/1
Elongation
Elongation at yield	6 %   ISO 527-2/50
Elongation at break	60 %   ISO 527-2/50
Flexural
Flexural Strenght	160 MPa   ISO 178
Flexural Modulus	3300 MPa   ISO 178
Other
Impact Strength	5 KJ/m2   ISO 180-1A
Filament spool selection
1. Prima Select 500g/750g
Ø Ds	200 mm
Ø ds	53 mm
Ws	51,5 mm
ws	45 mm
Emty weight Spool	0,229 kg
Material of Spool	PC
DB	205 mm
WB	62 mm
HB	213 mm
Emty weight box	0,105 kg
Material of box	Carboard