PrimaSelect PLA Glossy - 1.75mm - 750 g - Antique Copper

Buy PLA Glossy 3D printer filament & get a unique filament with a shiny surface

PLA Glossy is a unique filament due to its shiny surface. It will produce 3D prints with an extremely shiny and metal look finish. Objects 3D printed with this material, really stand out with its noble look and superior material properties.

Material properties PrimaSELECT PLA Glossy:

• Noble glossy surface
• Easy to 3D print with most 3D printers
• Wide temperature range of 210°C – 230°C
• Made from the purest PLA
• 3D print amazing creations in beautiful colors
• Heat resistant up to 75°C
• No harmful fumes

3D print strong & heat resistant objects with PLA Glossy

PLA Glossy is a new type of PLA that is much stronger than regular PLA and has a heat resistance up to 75°C. This means that you can use it for mechanical parts. For example, you can use the 3D printed parts in a hot car during summer without the risk of your 3D print getting soft.

How to 3D print PLA Glossy

PLA Glossy is used the same way as regular PLA, but in a slightly higher temperature range. Your 3D printing temperature should be between 210 – 230°C (typical is 220°C). The filament should be used with a heated build plate for best results. Depending on the size of your 3D print, you can use it within a range of 20 – 90°C (typical is 60°C). For regular 3D prints set the print speed to 40-60 mm/s.

We recommend that you use PrimaFIX on your build surface for best adhesion and to avoid warping.

Filament Typ	PLA
Diameter	1,75 mm
Lenght	0 m
Recomended Printing Temp Min	200 ºC
Recomended Printing Temp Max	230 ºC
Recomended Printbed Temperature Min	20 ºC
Recomended Printbed Temperature Max	60 ºC
Recomended Printing Speed Min	20 mm/s
Recommended Printing Speed Max	40 mm/s
Recomended Fan Speed Min	10 %
Recomended Fan Speed Max	30 %
General
Specific gravity	1,25 g/cm3   ASTM D792
Mold Shrinkage	0,3    ASTM D955
Temperature
Vicat softening temp	75 °C   ASTM D1525
Tensile
Tensile modulus	3200 MPa   ASTM D882
Elongation
Elongation at break	5 %   ASTM D882
Flexural
Flexural Strenght	41 MPa   ISO 527
Flexural Modulus	2200 MPa   ISO 178
Other
Impact Strength	12 KJ/m2   ASTM D256
Filament spool selection
1. Prima Select 500g/750g
Ø Ds	200 mm
Ø ds	53 mm
Ws	51,5 mm
ws	45 mm
Emty weight Spool	0,229 kg
Material of Spool	PC
DB	205 mm
WB	62 mm
HB	213 mm
Emty weight box	0,105 kg
Material of box	Carboard