PrimaCreator FlexPlate-Powder Coated PEI for Creality K1

PrimaCreator FlexPlate-Powder Coated PEI for Creality K1

PrimaCreator Flexplate is the upgrade your printer deserves. With its Powder Coated PEI it is the perfect surface to print on, its very durable and easy to manage. When finished printing you model, you can easily remove the print from the plate and continue with your next project.

PEI coated

PEI Ultem (Polyetherimide) from PrimaCreator is a reusable, relatively maintenance free, build surface for both ABS (with a Heated bed) and PLA (hot or cold), other materials such as Metal, Wood, PETG, ABS+ and many others also works just fine. You don’t require any additional adhesives such as glue or tape. PEI is appealing due to its "no-surface-prep" conditions, which make it convenient to work with. Additionally, printing on PEI requires no support rafts as parts adhere directly to the surface with no issue.

How To Use

Attach the plate to the build surface with the PEI side up. Thanks to the magnets in the plate, this is done easily. You don´t need any adhesives but if you are going to print something large or for a long time, we recommend using the PrimaFix adhesive stick, it will make your parts stick even better and release even easier when the print is done. After the print is done, just let the plate cool down, remove the plate and give it a gentle bend. You can then just “pop” the model off the plate.

Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly. Use acetone, isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use.