Popis
PLA+
PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
Recommended Settings
- Nozzle temperature: 190 – 220 ℃
- Build plate temperature: 30 - 60 ˚C
- Printing speed: 30 - 70 mm/s
- Build Surface Material: BuildTak®, Glass, Blue Tape
- Cooling Fan: ON
Basic Data Printing Parameter
| Filament Typ | PLA |
| Diameter | 1,75 mm |
| Weight | 1,00 kg |
| Lenght | 335 m |
| Color | White |
| Recomended Printing Temp Min | 190 ºC |
| Recomended Printing Temp Max | 220 ºC |
| Recomended Printbed Temperature Min | 30 ºC |
| Recomended Printbed Temperature Max | 60 ºC |
| Recomended Printing Speed Min | 30 mm/s |
| Recommended Printing Speed Max | 70 mm/s |
| Recomended Retraction Min | 30 mm |
| Recomended Retraction Max | 60 mm |
| General | |
| Specific gravity | 1,24 g/cm3 ISO 1183 |
| Temperature | |
| Vicat softening temp | 62 °C ISO 306 |
| Heat deflection temp | 56,2 °C ISO 75 |
| Flexural | |
| Flexural Strenght | 49,5 MPa ISO 178 |
| Flexural Modulus | 2232 MPa ISO 178 |
Polymaker PolyTerra PLA +