gh surface which gives it a very natural look. Matt PLA has a rough surface which gives it a more natural look when printed. It also has the benefit of higher prints speeds than regular PLA. This version of PLA is perfect when you don´t want shiny prints but rather have the matt surface without any reflections. It´s perfect for architects and model makers that don´t want that “plastic feeling”. Thanks to the very low shrinkage EasyPrint Matt PLA is very easy to use in all FDM/FFF printers. The risk of warping is very small with EasyPrint Matt PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a wide temperature range. Recommended temperature is 205° – 220°‘
Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.05 mm and continuous roundness.
Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.05 mm
Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmentally safe PLA and is REACH and RoHS compliant. There are no harmful additives in EasyPrint, so you don´t have to worry about any toxic fumes.
Ease of use
EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or PrimaFIX. There´s no need for a heated plate but if you have it, we recommend a setting of 40°- 60° for best results.
Basic Data Printing Parameter
| Filament Typ | PLA |
| Diameter | 1,75 mm |
| Weight | 3,00 kg |
| Lenght | 945 m |
| Color | Black |
| Recomended Printing Temp Min | 205 ºC |
| Recomended Printing Temp Max | 220 ºC |
| Recomended Printbed Temperature Min | 40 ºC |
| Recomended Printbed Temperature Max | 60 ºC |
| General | |
| Specific gravity | 1,32 |
| Temperature | |
| Vicat softening temp | 65 °C ISO 306 |
| Tensile | |
| Tensile strength | 50 MPa ISO 527 |
| Tensile modulus | 4050 MPa ISO 527 |
| Elongation | |
| Elongation at break | 62 % ISO 527 |
| Flexural | |
| Flexural Strenght | 83 MPa ISO 178 |
| Flexural Modulus | 3900 MPa ISO 178 |
| Other | |
| Impact Strenght Unnotched | 8,8 KJ/m2 ISO 179 |
| Impact Strength | 6,4 KJ/m2 ISO 179 |
| Filament spool selection | |
 |
 |
| 1. Easy Print 1kg | |
| Ø Ds | 200 mm |
| Ø ds | 54 mm |
| Ws | 65,6 mm |
| Emty weight Spool | 0,215 kg |
| Emty weight box | 0,155 kg |
EasyPrint PLA Matt - 1.75mm - 3 kg - Black
1559 Kč