Popis
with any 3D printer (FFF/FDM) on the market with mechanical characteristics superior to ABS.
With the creation of this material, Polymaker has been able to outperform other common 3D printing materials (PLA and ABS) with superior impact resistance compared to other PLA and better overall mechanical properties than ABS. Such is its impact resistance, which is 9 times more resistant than other regular PLA and 20% higher than ABS.
Recommended Settings
- Nozzle Temperature: 190˚C – 230˚C
- Printing Speed: 40mm/s – 60mm/s
- Bed Temperature: 25˚C – 60˚C
- Bed Surface: Glass with glue, Blue Tape, BuilTak®
- Cooling Fan: ON
Basic Data Printing Parameter
| Filament Typ | PLA tough |
| Diameter | 1,75 mm |
| Weight | 0,75 kg |
| Lenght | 267 m |
| Color | Purple |
| Recomended Printing Temp Min | 190 ºC |
| Recomended Printing Temp Max | 230 ºC |
| Recomended Printbed Temperature Min | 25 ºC |
| Recomended Printbed Temperature Max | 60 ºC |
| Recomended Printing Speed Min | 40 mm/s |
| Recommended Printing Speed Max | 60 mm/s |
| Recomended Retraction Min | 1 mm |
| General | |
| Specific gravity | 1,17 g/cm3 ISO 1183 |
| Temperature | |
| Vicat softening temp | 62 °C ISO 306 |
| Heat deflection temp | 52,3 °C ISO 75 |
| Tensile | |
| Tensile strength | 28,1 MPa ISO 527 |
| Tensile modulus | 1879 MPa ISO 527 |
| Flexural | |
| Flexural Strenght | 48 MPa ISO 178 |
| Flexural Modulus | 2119 MPa ISO 178 |
| Other | |
| Impact Strength | 12,2 KJ/m2 ISO 179 |
Polymaker PolyMax Tough PLA