eSun ePLA Lite
Based on ordinary PLA, ePLA Lite has better toughness and higher strength while maintaining the characteristic of easy to print .More durable and not easy to break with gorgeous smooth printing effect. User-friendly for beginners.
Dimensional Tolerance Consistency
1 kg spool (2.2lbs) with Accuracy +/- 0.03 mm, eSUN ePLA Lite 1.75mm 3D printer filament are produced with minimum tolerance and low warping to ensure consistent feeding and stable prints. Suitable for almost all 1.75mm FDM 3D printers.
Tangle Free & Clog Free
1KG filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.No bubbles, less stringing, high successful printing rate.
Cost-effective & Wide Application
Good layer adhesion performance meets your demands for printing functional parts with higher toughness. Widly used in machinery, electronic appliances, automobiles, decorations, COSPLAY and other field.
Environmental Friendly & Recyclable
eSUN ePLA Lite 3D printing filament is made with starch raw materials derived from renewable plant resources. Low odor. Scrap is reused to produce recyclable paper spool & packaging box.Come in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition.
Basic Data Printing Parameter
| Filament Typ | PLA |
| Diameter | 1,75 mm |
| Weight | 1,00 kg |
| Lenght | 338 m |
| Recomended Printing Temp Min | 190 ºC |
| Recomended Printing Temp Max | 230 ºC |
| Recomended Printbed Temperature Min | 45 ºC |
| Recomended Printbed Temperature Max | 60 ºC |
| Recomended Printing Speed Min | 40 mm/s |
| Recommended Printing Speed Max | 100 mm/s |
| Recomended Fan Speed Min | 100 % |
| Recomended Fan Speed Max | 100 % |
| General | |
| Specific gravity | 1,23 |
| Elongation | |
| Elongation at break | 29,92 % |
| Flexural | |
| Flexural Strenght | 100,27 MPa |
| Flexural Modulus | 3824 MPa |
| Other | |
| Impact Strength | 6,3 KJ/m2 |
| Filament spool selection | |
 |
 |
| 1. eSUN 1kg paper | |
| Ø Ds | 200 mm |
| Ø ds | 54 mm |
| Ws | 59 mm |
| ws | 53 mm |
| Emty weight Spool | 0,182 kg |
| Material of Spool | Carboard |
| DB | 205 mm |
| WB | 75 mm |
| HB | 212 mm |
| Emty weight box | 0,123 kg |
| Material of box | Carboard |
eSun ePLA-Lite
409 Kč