Luminous PLA
Luminous PLA contains phosphorescent materials that glow in the dark after absorbing light energy. Glowing effect is stronger when exposed to UV light. Please notice that this type of filaments should avoid long-time direct sunlight exposure.
Stable Dimensional Tolerance
Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.
Tangle Free & No Plugging
Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
High Compatibility
The finished items printed by PLA are best choice as gifts for Birthday, Christmas, New Year, Halloween and Valentine's Day. Widely used in DIY, art & craft, decoration, toy, sculptures, clothing and other creative projects.
Please Notice
PLA Material might wear nozzles and extruder gears, it is recommended to use hardened steel nozzles or ruby nozzles, hardened steel extruder gears will be better. If clogging occurs during long time printing, please try to replace the throat tube and nozzle.
Basic Data Printing Parameter
| Filament Typ | PLA |
| Diameter | 1,75 mm |
| Weight | 1,00 kg |
| Lenght | 346 m |
| Recomended Printing Temp Min | 190 ºC |
| Recomended Printing Temp Max | 230 ºC |
| Recomended Printbed Temperature Min | 45 ºC |
| Recomended Printbed Temperature Max | 60 ºC |
| Recomended Printing Speed Min | 40 mm/s |
| Recommended Printing Speed Max | 100 mm/s |
| Recomended Fan Speed Max | 100 % |
| General | |
| Specific gravity | 1,2 g/cm3 GB/T 1033 |
| Elongation | |
| Elongation at break | 11,8 % GB/T 1040 |
| Flexural | |
| Flexural Strenght | 90 MPa GB/T 9341 |
| Flexural Modulus | 1915 MPa GB/T 9341 |
| Other | |
| Impact Strength | 5,4 KJ/m2 GB/T 1634 |
| Filament spool selection | |
 |
 |
| 1. eSUN 1kg paper | |
| Ø Ds | 200 mm |
| Ø ds | 54 mm |
| Ws | 59 mm |
| ws | 53 mm |
| Emty weight Spool | 0,182 kg |
| Material of Spool | Carboard |
| DB | 205 mm |
| WB | 75 mm |
| HB | 212 mm |
| Emty weight box | 0,123 kg |
| Material of box | Carboard |
eSun PLA Luminous - Glow In The Dark
589 Kč