<!-- 标题加文案加大图部分 -->
Acknowledgement
We would like to send our sincere thanks to Lithophane Maker, who made great contributions to the lithophane printing groups. It has never been easier to create stunning color lithophanes that will leave a lasting impression with their amazing image-to-stl generator.
Bring colors to your lithophane
<!-- PC端图片 --> Make them into 3D pieces of art
<!-- PC端图片 -->
Quick Walkthrough
#1 Get your printer ready
| Printer with AMS | Bambu Lab Printers |
| AMS (Automatic Material System) | |
| Filaments (Hexcode#) | PLA Basic Cyan #0086D6 |
| PLA Basic Magenta #EC008C | |
| PLA Basic Yellow #F4EE2A | |
| PLA Basic Jade White #FFFFFF | |
| Nozzle | 0.2 mm (Recommended) |
| or 0.4 mm | |
| Build Plate | Bambu Cool Plate |
| Bambu High Temperature Plate (PEI) | |
| Bambu Dual-Sided Textured PEI Plate |
#2 Generate STL files and print
<!-- PC端图片 --> 1. Upload your favourite JPG image to Lithophane Maker and configure
<!-- PC端图片 --> 2. Create STL files and download
<!-- PC端图片 --> 3. Set up in Bambu Studio and slice
<!-- PC端图片 --> 4. Load filaments into corresponding AMS slot and print!
For a step-by-step guide, check out the CMYK Lithophane Printing Guide.
#3 Get the lithophane printed and lighten it up
<!-- PC端图片 --> 
For more information on Bambu CMYK LED Backlight Board.
Download Frame and Light Guide Plate.
Printing Tips
• Smaller nozzle sizes and lower layer heights are essential to achieve better printing results. We suggest using 0.2mm or 0.4mm nozzle sizes and layer heights between 0.08mm and 0.12mm. Check CMYK Lithophane Printing Guide on Wiki.
• Due to the limitations of printing layers and resolution, there may be some color deviation between the actual image and the lithophane prints.
• To prevent warping, the recommended heated bed temperature is between 45-50℃.