Menu
Support for ABS

Oficiální prodej CZ/SK

Support for ABS Čtěte více

Dočasně vyprodáno

449 Kč

Výrobce: Bambu Lab

Popis


Bambu Support for ABS

Enhance your ABS printing experience with our innovative support material. Designed for effortless printing and hassle-free removal, this material ensures a flawless support interface every time. Fully compatible with the AMS systems, it streamlines your ABS printing process from start to finish. Say goodbye to tedious support removal and enjoy a smoother, more efficient workflow!

Support for ABS Filament Support for ABS Filament

Easy Support Removal

Specially formulated for ABS, our support material adheres precisely to the ABS surface, allowing for easy support removal. This streamlines your post-processing work, ensuring a more efficient workflow.




Superior Support Interface Quality

Support for ABS enables a 0 Top Z distance and 0 Top interface spacing when printing, ensuring a scar free support surface. This enhances the sharpness of details, improving the overall appearance and integrity of your final prints.

Support for ABS Filament Support for ABS Filament
Support for ABS Filament Support for ABS Filament
Support for ABS Filament Support for ABS Filament

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

rfid rfid



Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

Support for PLA/PETG Support for PLA Support for ABS Support for PA/PET PVA
Color Nature White & Black White Green Clear
Nozzle Type All Size / Material All Size / Material 0.4 / 0.6 / 0.8 mm 0.4 / 0.6 / 0.8 mm Hardened Steel All Size / Material
Nozzle Temperature 190 - 220 °C 220 - 230 °C 240 - 270 °C 280 - 300 °C 220 - 250 °C
Bed Temperature 35 - 60 °C 35 - 45 °C 80 - 100 °C 80 - 100 °C 35 - 45 °C
Printing Speed < 100 mm/s < 200 mm/s < 100 mm/s < 100 mm/s < 200 mm/s
Solubility Water-insoluble Water-insoluble Water-insoluble, limonene-dissolvable Water-insoluble Water-dissolvable
Dry before Use Optional Optional Optional Required Required
Dry Protection during Use Optional Optional Optional Required Required
Filament Compatibility PLA, PETG PLA ABS PAHT-CF,PA6-CF,PA6-GF, PET-CF PLA, PETG

Accessory Compatibility

Recommended Not Recommended
Build Plate Smooth PEI Plate,Textured PEI Plate /
Hotend 0.4 / 0.6 / 0.8 mm 0.2 mm
Bambu Liquid Glue / Glue Stick Bambu Liquid Glue / Glue Stick /


Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C, 4 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 240 - 270 °C
Bed Temperature (with Glue) 80 - 100 °C
Printing Speed < 100 mm/s
Physical Properties
Density 1.16 g/cm³
Vicat Softening Temperature N / A
Heat Deflection Temperature N / A
Melting Temperature 195 °C
Melt Index 11.6 ± 0.7 g/10 min
Mechanical Properties
Tensile Strength N / A
Breaking Elongation Rate N / A
Bending Modulus N / A
Bending Strength N / A
Impact Strength N / A

Printing Tips

• Support for ABS is soluble in limonene. Please pay attention to the usage norms and safety.

Support for ABS Filament Support for ABS Filament
Support for ABS Filament Support for ABS Filament

• Pungent and unpleasant odors may be released during printing. Make sure your printer is enclosed and placed in a well-ventilated area.

• When layer strength is required, it is recommended to increase the flushing volume to above 800 mm³. If the flushing is not thorough, it may reduce the layer adhesion of the model at surfaces that are on the same horizontal plane as the support surface.

• By increasing the "initial layer speed", a more peelable support can be obtained. However, this will increase the risk of warping.

• Dry out before use for higher print quality. Drying conditions: 80℃ for 4 hrs in the blast drying oven; 85 - 95 ℃ for 6 hrs in the X1 Series Heatbed. Please refer to Filament drying instructions on WIKI.

• For more support-related settings, please refer to Support on WIKI.

What's in the Box

Filament with Spool*1 & Desiccant*1

图片加载失败文案 图片加载失败文案

Package*1


Nový dotaz k produktu

Kontrolný kód

i

Potřebujete poradit s výběrem zboží? 

Jsme tu pro Vás!

+420 572 155 055   

(Po - Čt 8:00 - 15:00, Pá 8:00 - 14:00)

info@na3D.cz

 

Dostupnost Bambu Lab

Tiskárny skladem, více info zde

Přihlášení

Zapomenuté heslo

Předvolby soukromí
Soubory cookie používáme k vylepšení vaší návštěvy tohoto webu, k analýze jeho výkonu a ke shromažďování údajů o jeho používání. Můžeme k tomu použít nástroje a služby třetích stran a shromážděná data mohou být přenášena partnerům v EU, USA nebo jiných zemích. Kliknutím na „Přijmout všechny soubory cookie“ vyjadřujete svůj souhlas s tímto zpracováním. Níže můžete najít podrobné informace nebo upravit své preference.

Zásady ochrany soukromí

Detailní nastavení
Tento web je chráněn reCAPTCHA a Google. Platí Zásady ochrany osobních údajů a Smluvní podmínky.

Přihlášení

Zapomenuté heslo

Produkt byl vložen do košíku
Pokračovat v nákupu Objednat