PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite. PLA is based on polylactic acid and is fully biodegradable and emits no toxic fumes. This means that you don’t have to worry about using the filament indoors with children or pets nearby. Copymaster3D PLA also has the benefit of very low shrinkage, this means that you will have very accurate prints, but also that the risk of warping is very low. Even though a heated build platform isn´t required we do recommend it as you will get the best adhesion. To be extra sure that the print sticks well to the build plate we recommend that you use PrimaFIX. It will make the prints stick better but will also make it much easier to remove the print from the build surface once it cools off. If you use the heated bed we recommend a temperature between 30-60°C
Basic Data | |
Filament Typ | PLA |
Diameter | 1,75 mm |
Tolerance | 0,05 mm |
Weight | 1,00 kg |
Lenght | 335 m |
Color | Luminous green Green - RAL 6038 |
Color | flouesecent green |
Printing Parameter | |
Recomended Printing Temp Min | 190 ºC |
Recomended Printing Temp Max | 220 ºC |
Recomended Printbed Temperature Min | 0 ºC |
Recomended Printbed Temperature Max | 45 ºC |
Recomended Printing Speed Min | 40 mm/s |
Recommended Printing Speed Max | 150 mm/s |
Recomended Fan Speed Min | 60 % |
Recomended Fan Speed Max | 100 % |
General | |
Specific gravity | 1,24 g/cm3 ASTM D792 |
Temperature | |
Heat deflection temp | 50 °C |
Tensile | |
Tensile strength | 45 MPa |
Elongation | |
Elongation at yield | 5,3 % ASTM D638 |
Elongation at break | 13,3 % ASTM D638 |
Flexural | |
Flexural Strenght | 63,64 MPa ISO 178 |
Flexural Modulus | 2157 MPa ISO 178 |
Other | |
Impact Strength | 17 KJ/m2 ISO 179 |
Filament spool selection | |
1. CopyMaster | |
Ø Ds | 201 mm |
Ø ds | 53 mm |
Ws | 66 mm |
Emty weight Spool | 0,217 kg |
Material of Spool | PS |
Emty weight box | 1 kg |
Copymaster PLA - 1.75mm -1 kg - Fluorescent Green
Doplňující informace
Kategorie: | PLA |
Barva: | zelená |
Váha materiálu: | 1 kg |
469 Kč