Náhradní díly
Náhradní díly
-
Přidat k OblíbenýmE3D RapidChange Revo™ Micro - 1.75mm, 12V Fully Loaded Kit
Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room...
Na objednávku (10001 ks)
4139 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Voron - 1.75mm, 12V Single Nozzle Kit
Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!
Na objednávku (10001 ks)
2419 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Voron - 1.75mm, 12V Fully Loaded Nozzle Kit
Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!
Na objednávku (10001 ks)
3939 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Hemera - 1.75mm, 12V Single Nozzle Kit
Revo Hemera is a compact, powerful extrusion system with the convenience of E3D’s RapidChange Revo ecosystem. With dual drive gears and hardened steel hobbs to grip filament from both sides, Revo Hemera gives your 3D printer exceptional pushing force. A tightly constrained filament path means material can’t flex and bend on its way to the melt zone, making it a top choice for challenging 3D...
Na objednávku (10001 ks)
4999 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Six - 1.75mm, 12V Fully Loaded Kit
Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at...
Na objednávku (10001 ks)
4139 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ CR - 1.75mm, 12V Single Nozzle Kit
Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.
Na objednávku (10001 ks)
2619 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ CR - 1.75mm, 24V Single Nozzle Kit
Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.
Na objednávku (10001 ks)
2619 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.4mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.6mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.8mm Nozzle
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10001 ks)
669 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo™ Brass 1.75mm 0.4mm Triple Nozzle Pack
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled...
Na objednávku (10000 ks)
1639 Kč
-
Přidat k OblíbenýmMK8 / CR10 Red Metal Extruder Kit
MK8 / CR10 Red Metal Extruder Kit
Skladem < 10 ks (3 ks)
469 Kč
-
Přidat k OblíbenýmPhaetus x PrimaCreator RepRap M6 Tungsten Carbide Nozzle 0,4 mm - 1,75 mm - 1 pcs
The premium nozzles from Phaetus/PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From conventional printing with...
Na objednávku (9999 ks)
1119 Kč
-
Přidat k OblíbenýmPhaetus VORON Dragon ST
Phaetus VORON Dragon Standard flow hot-end - (RepRap M6 Nozzle)
Na objednávku (10001 ks)
2189 Kč
-
Přidat k OblíbenýmPrimaCreator MK8 Mixed Size Brass Nozzle - 4 pcs (0.20 mm/0.40 mm/0.60 mm/0.80 mm)
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm
Na objednávku (10001 ks)
549 Kč