Taulman Nylon 230
Nylon 230 is the first nylon filament to be processed at 230°C or less. This is a lower temperature than any other nylon filament for your FFF/FDM-3D printer. With the release of Nylon 230 from Taulman3D, you can now process nylon on your low temperature PLA or ABS 3D printer. Add high-strength nylon to your list of processable materials. In addition, Nylon 230 adheres to BlueTape (painter's adhesive tape) and even better to "buildTak" type surfaces and various PVA glues / glue sticks.
Material properties:
- 3D print at 230 ° C
- Nylon 230 adheres to BlueTape
- Uses built-in for best adhesion
- Adheres to PVA glues / glue sticks
Buy Taulman Nylon 230 if you are looking for a strong and reliable filament for your FFF / FDM-3D printer.
Basic Data Printing Parameter
Filament Typ | PA |
Diameter | 1,75 mm |
Tolerance | 0,05 mm |
Weight | 0,45 kg |
Lenght | 148 m |
Color | clear transparent |
Color | clear |
Recomended Printing Temp Min | 228 ºC |
Recomended Printing Temp Max | 235 ºC |
Recomended Printbed Temperature Max | 55 ºC |
Recomended Retraction Min | 3 mm |
Recomended Retraction Max | 4 mm |
General | |
Specific gravity | 1,263 |
Tensile | |
Tensile strength | 34 MPa |
Elongation | |
Elongation at yield | 417 % |
Flexural | |
Flexural Modulus | 73 |
Taulman Nylon 230 - 1.75 mm - 450g - Clear
Více z kategorie
Doplňující informace
Kategorie: | PA - nylon |
Barva: | transparentní |
Váha materiálu: | 0,45 kg |
Průměr: | 1,75 mm |
629 Kč